Ute Tub Canopies
Is a tub canopy the right choice? If your ute is mostly a daily drive or family vehicle and you want lockable, weatherproof storage without giving up the factory tub, yes. A tub canopy bolts into the tub's existing mounting points — no tray conversion, no tub disposal, no engineering — and costs $2,199 to $2,299 fitted to your exact model. Because there's no tray underneath, the weight penalty is a fraction of a full tray-and-canopy build, which typically adds 300–450 kg.
These are sold per vehicle model rather than as generic sizes, because the shell has to match each tub's exact shape and mounting points. Full comparison against hard lids and full conversions: the tub canopy and hard lid guide.
Vehicle fitment and prices
| Vehicle | Price | RRP |
|---|---|---|
| Ford Ranger | $2,199 | $4,500 |
| Next Gen Ford Ranger & Amarok (2023+) | $2,199 | $4,500 |
| Isuzu D-MAX | $2,199 | $4,500 |
| Mazda BT-50 | $2,199 | $4,500 |
| Nissan Navara | $2,199 | $4,500 |
| Holden Colorado (2012–2020) | $2,199 | $4,500 |
| GWM Cannon | $2,199 | $4,500 |
| GWM Cannon, with windows | $2,299 | $4,700 |
GST inclusive, supply only, current at September 2026. If your vehicle isn't listed, call a showroom before assuming it isn't available — new tooling is added as demand justifies it.
Tub canopy, hard lid or full conversion
| Option | Best for | Trade-off |
|---|---|---|
| Hard lid | Weather protection and security with almost no weight or height penalty. | No standing height, no side access, least volume. |
| Tub canopy | Real lockable volume, zero tray conversion, ute stays close to factory. | Limited by the tub's shape and wheel arches. |
| Tray + canopy | Maximum volume, three-door access, jack-off capability. | Costs more and adds 300–450 kg. |
Fitting a tub canopy doesn't involve removing the tub, re-terminating the tail-light loom or relocating the fuel filler — all standard steps in a tray conversion. Expect a fitting appointment measured in hours, not most of a day.
Common questions
What is the difference between a tub canopy and a full canopy?
A tub canopy bolts into your factory tub's existing mounting points with no tray conversion. A full canopy bolts to an aluminium tray that has replaced the tub entirely, giving more internal volume and configuration options at a higher cost and with real added payload.
Does a tub canopy affect my payload much?
Far less than a full tray-and-canopy conversion, which commonly adds 300–450 kg. A tub canopy uses the tub's existing floor and structure, so the added mass is closer to that of the canopy shell alone.
Will a tub canopy fit any ute?
No. Tub canopies are vehicle-specific, shaped to each model's exact tub dimensions and mounting points. Check the fitment list above for your model.
Are tub canopies secure?
Yes — they lock rather than just latch, the same standard expected of a full canopy. Check door seals and lock quality the same way you would on any lockable ute storage.
Can I upgrade to a full tray-and-canopy conversion later?
Yes, but it means removing the tub canopy and starting the tray conversion from scratch — the two use different mounting systems. If a full conversion is likely within a year or two, price that build now rather than buying twice.
See them fitted at Laverton North VIC, Coopers Plains QLD or Penrith NSW, or call 1300 710 666.
